Not Step Not Half with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Not Step Not Half Just Family” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.52 in), scales to any size |
|---|---|
| Pieces | 15 separate pieces |
| Outlines to cut | 39: 15 outer edges and 24 cut-outs |
| Cut length | 2,662 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 1,176 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,796 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 23 mm) | 0.56 mm | 676 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.79 in (51 × 45 mm) | 1.1 mm | 1,352 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.68 in (76 × 68 mm) | 1.7 mm | 2,028 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.58 in (102 × 91 mm) | 2.2 mm | 2,705 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.36 in (152 × 136 mm) | 3.4 mm | 4,057 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.15 in (203 × 182 mm) | 4.5 mm | 5,409 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.73 in (305 × 272 mm) | 6.7 mm | 8,114 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Not Step Not Half Just Family SVG files
-
Not Step Not Half in Pacifico Solid · 10 pieces -
Not Step Not Half in Lobster Solid · 13 pieces -
Not Step Not Half in Kaushan Script Solid · 24 pieces -
Not Step Not Half in Lilita One Solid · 25 pieces -
Not Step Not Half in Alfa Slab One Solid · 25 pieces -
Not Step Not Half in Amatic SC Solid · 24 pieces -
Not Step Not Half in block capitals Solid · 24 pieces -
Not Step Not Half in script and capitals Solid · 20 pieces
← Not Step Not Half stencil plate All 12 Not Step Not Half Just Family designs Not Step Not Half in Pacifico →