Free Merica SVG

Merica in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merica in Alfa Slab One, as a solid black shape
Merica in Alfa Slab One. The preview is the SVG file itself.

“Merica” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 21 mm (3.94 × 0.83 in), scales to any size
Pieces7 separate pieces
Outlines to cut9: 7 outer edges and 2 cut-outs
Cut length524 mm at this size
Narrowest part2.7 mm at this size
Nodes116 curve and line segments

Measured from the file. PNG: 2,000 × 483 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.21 in (25 × 5 mm)0.69 mm133 mm290Fine detail: vinyl and paper only, weed with care
2 × 0.42 in (51 × 11 mm)1.4 mm266 mm95Vinyl, card and thin sheet
3 × 0.63 in (76 × 16 mm)2.1 mm399 mm42Vinyl, card and thin sheet
4 × 0.84 in (102 × 21 mm)2.7 mm532 mm22Vinyl, card and thin sheet
6 × 1.27 in (152 × 32 mm)4.1 mm799 mm8Any material, including 3 mm wood and acrylic
8 × 1.69 in (203 × 43 mm)5.5 mm1,065 mm6Any material, including 3 mm wood and acrylic
12 × 2.53 in (305 × 64 mm)8.2 mm1,597 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merica SVG files

← Merica in Lilita One All 14 Merica designs Merica in Amatic SC →