Free Merica SVG

Merica with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merica with a drop shadow, in layered colours
Merica with a drop shadow. The preview is the SVG file itself.

“Merica” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 28 mm (3.94 × 1.11 in), scales to any size
Pieces3 separate pieces
Outlines to cut8: 3 outer edges and 5 cut-outs
Cut length950 mm at this size
Narrowest part4.1 mm at this size
Nodes271 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 617 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)1 mm241 mm250Vinyl, card and thin sheet
2 × 0.56 in (51 × 14 mm)2.1 mm483 mm80Vinyl, card and thin sheet
3 × 0.84 in (76 × 21 mm)3.1 mm724 mm33Any material, including 3 mm wood and acrylic
4 × 1.12 in (102 × 29 mm)4.2 mm965 mm18Any material, including 3 mm wood and acrylic
6 × 1.69 in (152 × 43 mm)6.2 mm1,448 mm6Any material, including 3 mm wood and acrylic
8 × 2.25 in (203 × 57 mm)8.3 mm1,930 mm4Any material, including 3 mm wood and acrylic
12 × 3.37 in (305 × 86 mm)12 mm2,896 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merica SVG files

← Merica stencil plate All 14 Merica designs Merica with a waving flag →