Free Merica SVG

Merica in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merica in Amatic SC, as a solid black shape
Merica in Amatic SC. The preview is the SVG file itself.

“Merica” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 44 mm (3.94 × 1.71 in), scales to any size
Pieces6 separate pieces
Outlines to cut8: 6 outer edges and 2 cut-outs
Cut length900 mm at this size
Narrowest part2.5 mm at this size
Nodes260 curve and line segments

Measured from the file. PNG: 2,000 × 913 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.64 mm229 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.87 in (51 × 22 mm)1.3 mm457 mm55Vinyl, card and thin sheet
3 × 1.31 in (76 × 33 mm)1.9 mm686 mm24Vinyl, card and thin sheet
4 × 1.74 in (102 × 44 mm)2.5 mm914 mm12Vinyl, card and thin sheet
6 × 2.61 in (152 × 66 mm)3.8 mm1,372 mm4Any material, including 3 mm wood and acrylic
8 × 3.48 in (203 × 88 mm)5.1 mm1,829 mm3Any material, including 3 mm wood and acrylic
12 × 5.22 in (305 × 133 mm)7.6 mm2,743 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merica SVG files

← Merica in Alfa Slab One All 14 Merica designs Merica in block capitals →