Free Merica SVG

Merica with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merica with stars, as a solid black shape
Merica with stars. The preview is the SVG file itself.

“Merica” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 60 mm (3.94 × 2.37 in), scales to any size
Pieces10 separate pieces
Outlines to cut12: 10 outer edges and 2 cut-outs
Cut length867 mm at this size
Narrowest part1.4 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 2,000 × 1,235 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.36 mm220 mm150Too fine for most machines
2 × 1.2 in (51 × 31 mm)0.71 mm440 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.81 in (76 × 46 mm)1.1 mm661 mm18Vinyl, card and thin sheet
4 × 2.41 in (102 × 61 mm)1.4 mm881 mm8Vinyl, card and thin sheet
6 × 3.61 in (152 × 92 mm)2.1 mm1,321 mm3Vinyl, card and thin sheet
8 × 4.82 in (203 × 122 mm)2.8 mm1,762 mm2Vinyl, card and thin sheet
12 × 7.22 in (305 × 183 mm)4.3 mm2,643 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merica SVG files

← Merica in Rye All 14 Merica designs Merica outline lettering →