Free Merica SVG

Merica in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merica in Lilita One, as a solid black shape
Merica in Lilita One. The preview is the SVG file itself.

“Merica” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 24 mm (3.94 × 0.96 in), scales to any size
Pieces7 separate pieces
Outlines to cut9: 7 outer edges and 2 cut-outs
Cut length507 mm at this size
Narrowest part3.5 mm at this size
Nodes138 curve and line segments

Measured from the file. PNG: 2,000 × 546 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.24 in (25 × 6 mm)0.89 mm129 mm270Fine detail: vinyl and paper only, weed with care
2 × 0.49 in (51 × 12 mm)1.8 mm258 mm85Vinyl, card and thin sheet
3 × 0.73 in (76 × 19 mm)2.7 mm386 mm39Vinyl, card and thin sheet
4 × 0.98 in (102 × 25 mm)3.6 mm515 mm20Any material, including 3 mm wood and acrylic
6 × 1.46 in (152 × 37 mm)5.3 mm773 mm7Any material, including 3 mm wood and acrylic
8 × 1.95 in (203 × 50 mm)7.1 mm1,030 mm5Any material, including 3 mm wood and acrylic
12 × 2.93 in (305 × 74 mm)11 mm1,545 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merica SVG files

← Merica in Kaushan Script All 14 Merica designs Merica in Alfa Slab One →