Free Merica SVG

Merica with a waving flag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merica with a waving flag. The preview is the SVG file itself.

“Merica” with a waving flag above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	7: 5 outer edges and 2 cut-outs
Cut length	773 mm at this size
Narrowest part	1.4 mm at this size
Nodes	143 curve and line segments

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.36 mm	196 mm	120	Too fine for most machines
2 × 1.52 in (51 × 39 mm)	0.71 mm	393 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.28 in (76 × 58 mm)	1.1 mm	589 mm	12	Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)	1.4 mm	785 mm	6	Vinyl, card and thin sheet
6 × 4.56 in (152 × 116 mm)	2.1 mm	1,178 mm	2	Vinyl, card and thin sheet
8 × 6.08 in (203 × 154 mm)	2.8 mm	1,571 mm	1	Vinyl, card and thin sheet
12 × 9.12 in (305 × 232 mm)	4.3 mm	2,356 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merica SVG files

← Merica with a drop shadow All 14 Merica designs Merica in Pacifico →