Free lily SVG

Tiger lily, a Turk’s cap SVG

Tiger lily, a Turk’s cap, as a solid black shape — Tiger lily, a Turk’s cap. The preview is the SVG file itself.

A tiger lily nodding from an arched stem: its spotted tepals curled right back into a cap, six stamens hanging below with their anthers, and a bud and narrow leaves on the stem.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	94 × 100 mm (3.69 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	21: 1 outer edge and 20 cut-outs
Cut length	1,147 mm at this size
Narrowest part	1.7 mm at this size
Nodes	236 curve and line segments

Measured from the file. PNG: 1,879 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.94 × 1 in (24 × 25 mm)	0.43 mm	291 mm	100	Too fine for most machines
1.87 × 2 in (48 × 51 mm)	0.86 mm	583 mm	25	Fine detail: vinyl and paper only, weed with care
2.81 × 3 in (71 × 76 mm)	1.3 mm	874 mm	12	Vinyl, card and thin sheet
3.75 × 4 in (95 × 102 mm)	1.7 mm	1,165 mm	6	Vinyl, card and thin sheet
5.62 × 6 in (143 × 152 mm)	2.6 mm	1,748 mm	2	Vinyl, card and thin sheet
7.5 × 8 in (190 × 203 mm)	3.5 mm	2,331 mm	1	Any material, including 3 mm wood and acrylic
11.24 × 12 in (286 × 305 mm)	5.2 mm	3,496 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lily SVG files

← Lily stem in bud All 14 lilies Calla lily with a leaf →