Free lily SVG

Lily stem in bud SVG

Lily stem in bud, as a solid black shape
Lily stem in bud. The preview is the SVG file itself.

A tall stem with three slim buds at the top, each with its two creases, and narrow leaves by turns up both sides. The lily before it opens, for the edge of a card or a bookmark.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size46 × 100 mm (1.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length591 mm at this size
Narrowest part1.7 mm at this size
Nodes215 curve and line segments

Measured from the file. PNG: 958 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.46 × 1 in (12 × 25 mm)0.43 mm150 mm180Too fine for most machines
0.92 × 2 in (23 × 51 mm)0.86 mm300 mm50Fine detail: vinyl and paper only, weed with care
1.37 × 3 in (35 × 76 mm)1.3 mm450 mm21Vinyl, card and thin sheet
1.83 × 4 in (47 × 102 mm)1.7 mm600 mm12Vinyl, card and thin sheet
2.75 × 6 in (70 × 152 mm)2.6 mm901 mm4Vinyl, card and thin sheet
3.66 × 8 in (93 × 203 mm)3.5 mm1,201 mm3Any material, including 3 mm wood and acrylic
5.5 × 12 in (140 × 305 mm)5.2 mm1,801 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lily SVG files

← Easter lily with two trumpets and a bud All 14 lilies Tiger lily, a Turk’s cap →