Free lily SVG

Calla lily with a leaf SVG

Calla lily with a leaf, as a solid black shape — Calla lily with a leaf. The preview is the SVG file itself.

A single calla: one smooth funnel wrapped round on itself, its tip curling to a point and the spike showing in the mouth, on a thick stem beside an arrow-shaped leaf.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	52 × 100 mm (2.04 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	559 mm at this size
Narrowest part	2.7 mm at this size
Nodes	86 curve and line segments

Measured from the file. PNG: 1,071 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.52 × 1 in (13 × 25 mm)	0.69 mm	142 mm	170	Fine detail: vinyl and paper only, weed with care
1.03 × 2 in (26 × 51 mm)	1.4 mm	284 mm	45	Vinyl, card and thin sheet
1.55 × 3 in (39 × 76 mm)	2.1 mm	426 mm	18	Vinyl, card and thin sheet
2.07 × 4 in (53 × 102 mm)	2.7 mm	568 mm	10	Vinyl, card and thin sheet
3.1 × 6 in (79 × 152 mm)	4.1 mm	852 mm	3	Any material, including 3 mm wood and acrylic
4.14 × 8 in (105 × 203 mm)	5.5 mm	1,136 mm	2	Any material, including 3 mm wood and acrylic
6.2 × 12 in (158 × 305 mm)	8.2 mm	1,704 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lily SVG files

← Tiger lily, a Turk’s cap All 14 lilies Three calla lilies tied with a ribbon →