Free lily SVG

Three calla lilies tied with a ribbon SVG

Three calla lilies tied with a ribbon, as a solid black shape — Three calla lilies tied with a ribbon. The preview is the SVG file itself.

Three callas of different heights with their stems gathered under a ribbon band, the outer two leaning away. The wedding bouquet flower, for invitations, orders of service and place cards.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	74 × 100 mm (2.9 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	15: 1 outer edge and 14 cut-outs
Cut length	928 mm at this size
Narrowest part	1.6 mm at this size
Nodes	264 curve and line segments

Measured from the file. PNG: 1,492 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.74 × 1 in (19 × 25 mm)	0.41 mm	236 mm	130	Too fine for most machines
1.47 × 2 in (37 × 51 mm)	0.81 mm	471 mm	35	Fine detail: vinyl and paper only, weed with care
2.21 × 3 in (56 × 76 mm)	1.2 mm	707 mm	15	Vinyl, card and thin sheet
2.94 × 4 in (75 × 102 mm)	1.6 mm	943 mm	6	Vinyl, card and thin sheet
4.42 × 6 in (112 × 152 mm)	2.4 mm	1,414 mm	2	Vinyl, card and thin sheet
5.89 × 8 in (150 × 203 mm)	3.3 mm	1,886 mm	2	Any material, including 3 mm wood and acrylic
8.83 × 12 in (224 × 305 mm)	4.9 mm	2,829 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lily SVG files

← Calla lily with a leaf All 14 lilies Water lily on its pad →