Leggings Leaves Lattes stencil plate SVG
A rounded plate with “LEGGINGS LEAVES AND LATTES PLEASE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 30: 1 outer edge and 29 cut-outs |
| Cut length | 1,692 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 550 curve and line segments |
Measured from the file. PNG: 2,000 × 1,425 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.28 mm | 430 mm | 130 | Too fine for most machines |
| 2 × 1.4 in (51 × 36 mm) | 0.56 mm | 860 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.1 in (76 × 53 mm) | 0.84 mm | 1,289 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.8 in (102 × 71 mm) | 1.1 mm | 1,719 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.21 in (152 × 107 mm) | 1.7 mm | 2,579 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.61 in (203 × 142 mm) | 2.2 mm | 3,438 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.41 in (305 × 214 mm) | 3.4 mm | 5,157 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Leggings Leaves and Lattes Please SVG files
-
Leggings Leaves Lattes with a drop shadow Layered · 11 pieces -
Leggings Leaves Lattes in Pacifico Solid · 7 pieces -
Leggings Leaves Lattes in Lobster Solid · 11 pieces -
Leggings Leaves Lattes in Kaushan Script Solid · 30 pieces -
Leggings Leaves Lattes in Lilita One Solid · 30 pieces -
Leggings Leaves Lattes in Alfa Slab One Solid · 29 pieces -
Leggings Leaves Lattes in Amatic SC Solid · 29 pieces -
Leggings Leaves Lattes in block capitals Solid · 29 pieces
← Leggings Leaves Lattes outline lettering All 12 Leggings Leaves and Lattes Please designs Leggings Leaves Lattes with a drop shadow →