Leggings Leaves Lattes in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Leggings Leaves and Lattes Please” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 52 mm (3.94 × 2.06 in), scales to any size |
|---|---|
| Pieces | 30 separate pieces |
| Outlines to cut | 45: 30 outer edges and 15 cut-outs |
| Cut length | 1,207 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 502 curve and line segments |
Measured from the file. PNG: 2,000 × 1,083 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.52 in (25 × 13 mm) | 0.48 mm | 307 mm | 160 | Too fine for most machines |
| 2 × 1.05 in (51 × 27 mm) | 0.97 mm | 613 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.57 in (76 × 40 mm) | 1.4 mm | 920 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.09 in (102 × 53 mm) | 1.9 mm | 1,226 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.14 in (152 × 80 mm) | 2.9 mm | 1,839 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.18 in (203 × 106 mm) | 3.9 mm | 2,453 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.28 in (305 × 159 mm) | 5.8 mm | 3,679 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Leggings Leaves and Lattes Please SVG files
-
Leggings Leaves Lattes in Alfa Slab One Solid · 29 pieces
-
Leggings Leaves Lattes in Amatic SC Solid · 29 pieces
-
Leggings Leaves Lattes in block capitals Solid · 29 pieces
-
Leggings Leaves Lattes in script and capitals Solid · 23 pieces
-
Leggings Leaves Lattes with hearts Solid · 17 pieces
-
Leggings Leaves Lattes outline lettering Outline · 31 pieces
-
Leggings Leaves Lattes stencil plate Solid · one piece
-
Leggings Leaves Lattes with a drop shadow Layered · 11 pieces
← Leggings Leaves Lattes in Kaushan Script All 13 Leggings Leaves and Lattes Please designs Leggings Leaves Lattes in Alfa Slab One →