Free Leggings Leaves and Lattes Please SVG

Leggings Leaves Lattes with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leggings Leaves Lattes with a drop shadow, in layered colours
Leggings Leaves Lattes with a drop shadow. The preview is the SVG file itself.

“Leggings Leaves and Lattes Please” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces11 separate pieces
Outlines to cut38: 11 outer edges and 27 cut-outs
Cut length2,167 mm at this size
Narrowest part1.3 mm at this size
Nodes847 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,479 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 19 mm)0.33 mm550 mm130Too fine for most machines
2 × 1.46 in (51 × 37 mm)0.66 mm1,101 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.19 in (76 × 56 mm)0.99 mm1,651 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.92 in (102 × 74 mm)1.3 mm2,202 mm6Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)2 mm3,303 mm2Vinyl, card and thin sheet
8 × 5.83 in (203 × 148 mm)2.6 mm4,403 mm2Vinyl, card and thin sheet
12 × 8.75 in (305 × 222 mm)4 mm6,605 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Leggings Leaves and Lattes Please SVG files

← Leggings Leaves Lattes stencil plate All 13 Leggings Leaves and Lattes Please designs Leggings Leaves Lattes with a maple leaf →