Free Leggings Leaves and Lattes Please SVG

Leggings Leaves Lattes in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leggings Leaves Lattes in Alfa Slab One, as a solid black shape
Leggings Leaves Lattes in Alfa Slab One. The preview is the SVG file itself.

“Leggings Leaves and Lattes Please” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 46 mm (3.94 × 1.81 in), scales to any size
Pieces29 separate pieces
Outlines to cut44: 29 outer edges and 15 cut-outs
Cut length1,275 mm at this size
Narrowest part1.4 mm at this size
Nodes511 curve and line segments

Measured from the file. PNG: 2,000 × 962 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.36 mm324 mm180Too fine for most machines
2 × 0.92 in (51 × 23 mm)0.71 mm648 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.38 in (76 × 35 mm)1.1 mm972 mm21Vinyl, card and thin sheet
4 × 1.84 in (102 × 47 mm)1.4 mm1,295 mm10Vinyl, card and thin sheet
6 × 2.76 in (152 × 70 mm)2.1 mm1,943 mm4Vinyl, card and thin sheet
8 × 3.68 in (203 × 93 mm)2.8 mm2,591 mm3Vinyl, card and thin sheet
12 × 5.52 in (305 × 140 mm)4.3 mm3,886 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Leggings Leaves and Lattes Please SVG files

← Leggings Leaves Lattes in Lilita One All 13 Leggings Leaves and Lattes Please designs Leggings Leaves Lattes in Amatic SC →