Leggings Leaves Lattes with a maple leaf SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Leggings Leaves and Lattes Please” with a maple leaf above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.
What is in the file
| Size | 76 × 100 mm (2.98 × 3.94 in), scales to any size |
|---|---|
| Pieces | 24 separate pieces |
| Outlines to cut | 42: 24 outer edges and 18 cut-outs |
| Cut length | 1,812 mm at this size |
| Narrowest part | 0.8 mm at this size |
| Nodes | 515 curve and line segments |
Measured from the file. PNG: 1,533 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.76 × 1 in (19 × 25 mm) | 0.2 mm | 460 mm | 120 | Too fine for most machines |
| 1.51 × 2 in (38 × 51 mm) | 0.41 mm | 920 mm | 35 | Too fine for most machines |
| 2.27 × 3 in (58 × 76 mm) | 0.61 mm | 1,381 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.03 × 4 in (77 × 102 mm) | 0.81 mm | 1,841 mm | 6 | Fine detail: vinyl and paper only, weed with care |
| 4.54 × 6 in (115 × 152 mm) | 1.2 mm | 2,761 mm | 2 | Vinyl, card and thin sheet |
| 6.06 × 8 in (154 × 203 mm) | 1.6 mm | 3,682 mm | 1 | Vinyl, card and thin sheet |
| 9.08 × 12 in (231 × 305 mm) | 2.4 mm | 5,523 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Leggings Leaves and Lattes Please SVG files
-
Leggings Leaves Lattes in Pacifico Solid · 7 pieces -
Leggings Leaves Lattes in Lobster Solid · 11 pieces -
Leggings Leaves Lattes in Kaushan Script Solid · 27 pieces -
Leggings Leaves Lattes in Lilita One Solid · 30 pieces -
Leggings Leaves Lattes in Alfa Slab One Solid · 29 pieces -
Leggings Leaves Lattes in Amatic SC Solid · 29 pieces -
Leggings Leaves Lattes in block capitals Solid · 29 pieces -
Leggings Leaves Lattes in script and capitals Solid · 23 pieces
← Leggings Leaves Lattes with a drop shadow All 13 Leggings Leaves and Lattes Please designs Leggings Leaves Lattes in Pacifico →