Free keyboard SVG

Keyboard outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Keyboard outline, drawn as a line
Keyboard outline. The preview is the SVG file itself.

The keyboard icon drawn in line: the plate and every key as its own small outline. The keys are loose pieces inside the plate, so this one is for pen plotters, foil and print then cut.

What is in the file

Size100 × 62 mm (3.94 × 2.44 in), scales to any size
Pieces32 separate pieces
Outlines to cut64: 32 outer edges and 32 cut-outs
Cut length2,297 mm at this size
Narrowest part1.7 mm at this size
Nodes652 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,269 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.43 mm583 mm140Too fine for most machines
2 × 1.24 in (51 × 31 mm)0.86 mm1,167 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.86 in (76 × 47 mm)1.3 mm1,750 mm15Vinyl, card and thin sheet
4 × 2.48 in (102 × 63 mm)1.7 mm2,334 mm8Vinyl, card and thin sheet
6 × 3.72 in (152 × 94 mm)2.6 mm3,501 mm3Vinyl, card and thin sheet
8 × 4.96 in (203 × 126 mm)3.5 mm4,668 mm2Any material, including 3 mm wood and acrylic
12 × 7.44 in (305 × 189 mm)5.2 mm7,001 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More keyboard SVG files

← Typewriter keyboard silhouette All 16 keyboards Layered keyboard in three colours →