Free keyboard SVG

Tilted keyboard seen from the front SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tilted keyboard seen from the front, as a solid black shape
Tilted keyboard seen from the front. The preview is the SVG file itself.

The compact board lying at an angle, as it looks from your chair: the rows lean away and a front edge gives the plate some thickness. All the keys are open and the board is one piece.

What is in the file

Size100 × 55 mm (3.94 × 2.17 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut62: 1 outer edge and 61 cut-outs
Cut length1,190 mm at this size
Narrowest part2.1 mm at this size
Nodes444 curve and line segments

Measured from the file. PNG: 2,000 × 1,135 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.53 mm302 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.1 in (51 × 28 mm)1.1 mm605 mm45Vinyl, card and thin sheet
3 × 1.65 in (76 × 42 mm)1.6 mm907 mm18Vinyl, card and thin sheet
4 × 2.2 in (102 × 56 mm)2.1 mm1,209 mm10Vinyl, card and thin sheet
6 × 3.3 in (152 × 84 mm)3.2 mm1,814 mm3Any material, including 3 mm wood and acrylic
8 × 4.4 in (203 × 112 mm)4.3 mm2,418 mm2Any material, including 3 mm wood and acrylic
12 × 6.6 in (305 × 168 mm)6.4 mm3,627 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More keyboard SVG files

← Keyboard icon All 16 keyboards Blank keyboard key →