Free keyboard SVG

Piano keys in a wave SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Piano keys in a wave, as a solid black shape — Piano keys in a wave. The preview is the SVG file itself.

Two octaves of piano keys bending over a gentle wave and narrowing a little towards one end, as if the keyboard were a ribbon. One piece, for music room signs and recital cards.

What is in the file

Size	100 × 50 mm (3.94 × 1.98 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	15: 1 outer edge and 14 cut-outs
Cut length	1,055 mm at this size
Narrowest part	1.8 mm at this size
Nodes	109 curve and line segments

Measured from the file. PNG: 2,000 × 1,042 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.46 mm	268 mm	170	Too fine for most machines
2 × 1 in (51 × 26 mm)	0.91 mm	536 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.51 in (76 × 38 mm)	1.4 mm	804 mm	21	Vinyl, card and thin sheet
4 × 2.01 in (102 × 51 mm)	1.8 mm	1,072 mm	10	Vinyl, card and thin sheet
6 × 3.01 in (152 × 77 mm)	2.7 mm	1,608 mm	3	Vinyl, card and thin sheet
8 × 4.02 in (203 × 102 mm)	3.7 mm	2,144 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.02 in (305 × 153 mm)	5.5 mm	3,216 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More keyboard SVG files

← Piano keyboard All 16 keyboards Piano keyboard heart →