Free keyboard SVG

Keyboard arrow keys SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Keyboard arrow keys. The preview is the SVG file itself.

The four arrow keys in their usual upside-down T, each a small keycap with a triangle cut in its face. The caps are welded where they meet, so the group cuts and lifts as one piece.

What is in the file

Size	100 × 67 mm (3.94 × 2.63 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	29: 1 outer edge and 28 cut-outs
Cut length	1,224 mm at this size
Narrowest part	2 mm at this size
Nodes	226 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,363 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.67 in (25 × 17 mm)	0.51 mm	311 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.34 in (51 × 34 mm)	1 mm	622 mm	35	Vinyl, card and thin sheet
3 × 2.01 in (76 × 51 mm)	1.5 mm	933 mm	15	Vinyl, card and thin sheet
4 × 2.68 in (102 × 68 mm)	2 mm	1,244 mm	8	Vinyl, card and thin sheet
6 × 4.01 in (152 × 102 mm)	3 mm	1,865 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.35 in (203 × 136 mm)	4.1 mm	2,487 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.03 in (305 × 204 mm)	6.1 mm	3,731 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More keyboard SVG files

← Blank keyboard key All 16 keyboards Keyboard shortcut of three blank keys →