Joy with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Joy” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.1 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 10: 4 outer edges and 6 cut-outs |
| Cut length | 1,253 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 208 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,592 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | Over 1.5 mm | 318 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.58 in (51 × 40 mm) | Over 3 mm | 637 mm | 30 | Any material, including 3 mm wood and acrylic |
| 3 × 2.36 in (76 × 60 mm) | Over 4.6 mm | 955 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.15 in (102 × 80 mm) | Over 6.1 mm | 1,273 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.73 in (152 × 120 mm) | Over 9.1 mm | 1,910 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.3 in (203 × 160 mm) | Over 12 mm | 2,546 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.46 in (305 × 240 mm) | Over 18 mm | 3,819 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Joy SVG files
-
Joy with a sprig of holly Solid · 3 pieces
-
Joy in Pacifico Solid · 2 pieces
-
Joy in Lobster Solid · 2 pieces
-
Joy in Kaushan Script Solid · 3 pieces
-
Joy in Lilita One Solid · 3 pieces
-
Joy in Alfa Slab One Solid · 3 pieces
-
Joy in Amatic SC Solid · 3 pieces
-
Joy in block capitals Solid · 3 pieces
← Joy stencil plate All 13 Joy designs Joy with a sprig of holly →