Free Joy SVG

Joy in block capitals SVG

Joy in block capitals, as a solid black shape — Joy in block capitals. The preview is the SVG file itself.

“JOY” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 71 mm (3.94 × 2.79 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	4: 3 outer edges and 1 cut-out
Cut length	696 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	41 curve and line segments

Measured from the file. PNG: 2,000 × 1,440 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.71 in (25 × 18 mm)	Over 1.5 mm	177 mm	130	Vinyl, card and thin sheet
2 × 1.42 in (51 × 36 mm)	Over 3 mm	354 mm	35	Any material, including 3 mm wood and acrylic
3 × 2.13 in (76 × 54 mm)	Over 4.6 mm	530 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.84 in (102 × 72 mm)	Over 6.1 mm	707 mm	8	Any material, including 3 mm wood and acrylic
6 × 4.25 in (152 × 108 mm)	Over 9.1 mm	1,061 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.67 in (203 × 144 mm)	Over 12 mm	1,414 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.51 in (305 × 216 mm)	Over 18 mm	2,121 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy SVG files

← Joy in Amatic SC All 12 Joy designs Joy with a swash underline →