Free Joy SVG

Joy with a sprig of holly SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Joy with a sprig of holly, as a solid black shape — Joy with a sprig of holly. The preview is the SVG file itself.

“Joy” with a sprig of holly above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	91 × 100 mm (3.57 × 3.94 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	11: 3 outer edges and 8 cut-outs
Cut length	967 mm at this size
Narrowest part	1.7 mm at this size
Nodes	267 curve and line segments

Measured from the file. PNG: 1,823 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.91 × 1 in (23 × 25 mm)	0.43 mm	246 mm	110	Too fine for most machines
1.82 × 2 in (46 × 51 mm)	0.86 mm	491 mm	30	Fine detail: vinyl and paper only, weed with care
2.72 × 3 in (69 × 76 mm)	1.3 mm	737 mm	12	Vinyl, card and thin sheet
3.63 × 4 in (92 × 102 mm)	1.7 mm	982 mm	6	Vinyl, card and thin sheet
5.45 × 6 in (138 × 152 mm)	2.6 mm	1,474 mm	2	Vinyl, card and thin sheet
7.26 × 8 in (185 × 203 mm)	3.5 mm	1,965 mm	1	Any material, including 3 mm wood and acrylic
10.9 × 12 in (277 × 305 mm)	5.2 mm	2,947 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy SVG files

← Joy with a drop shadow All 13 Joy designs Joy in Pacifico →