Joy in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Joy” set in Kaushan Script, a lively brush script. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.89 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 4: 3 outer edges and 1 cut-out |
| Cut length | 607 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 119 curve and line segments |
Measured from the file. PNG: 2,000 × 1,488 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 19 mm) | 0.51 mm | 154 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.47 in (51 × 37 mm) | 1 mm | 308 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.2 in (76 × 56 mm) | 1.5 mm | 463 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.94 in (102 × 75 mm) | 2 mm | 617 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.4 in (152 × 112 mm) | 3 mm | 925 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.87 in (203 × 149 mm) | 4.1 mm | 1,233 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.81 in (305 × 224 mm) | 6.1 mm | 1,850 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.