Free Joy SVG

Joy in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Joy in Amatic SC, as a solid black shape
Joy in Amatic SC. The preview is the SVG file itself.

“Joy” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size93 × 100 mm (3.67 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut4: 3 outer edges and 1 cut-out
Cut length862 mm at this size
Narrowest part5.7 mm at this size
Nodes165 curve and line segments

Measured from the file. PNG: 1,871 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.93 × 1 in (24 × 25 mm)1.4 mm219 mm100Vinyl, card and thin sheet
1.87 × 2 in (47 × 51 mm)2.9 mm438 mm25Vinyl, card and thin sheet
2.8 × 3 in (71 × 76 mm)4.3 mm657 mm12Any material, including 3 mm wood and acrylic
3.73 × 4 in (95 × 102 mm)5.8 mm876 mm6Any material, including 3 mm wood and acrylic
5.6 × 6 in (142 × 152 mm)8.7 mm1,314 mm2Any material, including 3 mm wood and acrylic
7.46 × 8 in (190 × 203 mm)12 mm1,752 mm1Any material, including 3 mm wood and acrylic
11.2 × 12 in (284 × 305 mm)17 mm2,627 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy SVG files

← Joy in Alfa Slab One All 13 Joy designs Joy in block capitals →