Free Joy to the World SVG

Joy to the World in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Joy to the World in Pacifico, as a solid black shape
Joy to the World in Pacifico. The preview is the SVG file itself.

“Joy to the World” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 55 mm (3.94 × 2.16 in), scales to any size
Pieces5 separate pieces
Outlines to cut19: 5 outer edges and 14 cut-outs
Cut length991 mm at this size
Narrowest part0.8 mm at this size
Nodes333 curve and line segments

Measured from the file. PNG: 2,000 × 1,133 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.2 mm252 mm160Too fine for most machines
2 × 1.1 in (51 × 28 mm)0.41 mm503 mm45Too fine for most machines
3 × 1.65 in (76 × 42 mm)0.61 mm755 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.2 in (102 × 56 mm)0.81 mm1,007 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.29 in (152 × 84 mm)1.2 mm1,510 mm3Vinyl, card and thin sheet
8 × 4.39 in (203 × 112 mm)1.6 mm2,014 mm2Vinyl, card and thin sheet
12 × 6.59 in (305 × 167 mm)2.4 mm3,021 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy to the World SVG files

← Joy to the World with a sprig of holly All 13 Joy to the World designs Joy to the World in Lobster →