Free Joy to the World SVG

Joy to the World in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Joy to the World in Kaushan Script, as a solid black shape
Joy to the World in Kaushan Script. The preview is the SVG file itself.

“Joy to the World” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 51 mm (3.94 × 2.01 in), scales to any size
Pieces12 separate pieces
Outlines to cut17: 12 outer edges and 5 cut-outs
Cut length955 mm at this size
Narrowest part0.9 mm at this size
Nodes382 curve and line segments

Measured from the file. PNG: 2,000 × 1,058 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.23 mm243 mm170Too fine for most machines
2 × 1.02 in (51 × 26 mm)0.46 mm485 mm50Too fine for most machines
3 × 1.53 in (76 × 39 mm)0.69 mm728 mm21Fine detail: vinyl and paper only, weed with care
4 × 2.04 in (102 × 52 mm)0.91 mm970 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.06 in (152 × 78 mm)1.4 mm1,455 mm3Vinyl, card and thin sheet
8 × 4.08 in (203 × 104 mm)1.8 mm1,941 mm2Vinyl, card and thin sheet
12 × 6.12 in (305 × 155 mm)2.7 mm2,911 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy to the World SVG files

← Joy to the World in Lobster All 13 Joy to the World designs Joy to the World in Lilita One →