Free Joy to the World SVG

Joy to the World in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Joy to the World in Lilita One, as a solid black shape
Joy to the World in Lilita One. The preview is the SVG file itself.

“Joy to the World” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces13 separate pieces
Outlines to cut18: 13 outer edges and 5 cut-outs
Cut length726 mm at this size
Narrowest part2.6 mm at this size
Nodes207 curve and line segments

Measured from the file. PNG: 2,000 × 900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.66 mm184 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.86 in (51 × 22 mm)1.3 mm369 mm55Vinyl, card and thin sheet
3 × 1.28 in (76 × 33 mm)2 mm553 mm24Vinyl, card and thin sheet
4 × 1.71 in (102 × 43 mm)2.6 mm738 mm12Vinyl, card and thin sheet
6 × 2.57 in (152 × 65 mm)4 mm1,106 mm4Any material, including 3 mm wood and acrylic
8 × 3.42 in (203 × 87 mm)5.3 mm1,475 mm3Any material, including 3 mm wood and acrylic
12 × 5.14 in (305 × 130 mm)7.9 mm2,213 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy to the World SVG files

← Joy to the World in Kaushan Script All 13 Joy to the World designs Joy to the World in Alfa Slab One →