Free Joy to the World SVG

Joy to the World in script and capitals SVG

Joy to the World in script and capitals, as a solid black shape
Joy to the World in script and capitals. The preview is the SVG file itself.

“Joy to” in Pacifico script over “THE WORLD” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 76 mm (3.94 × 2.98 in), scales to any size
Pieces11 separate pieces
Outlines to cut19: 11 outer edges and 8 cut-outs
Cut length1,329 mm at this size
Narrowest part2 mm at this size
Nodes234 curve and line segments

Measured from the file. PNG: 2,000 × 1,535 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.51 mm338 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.52 in (51 × 39 mm)1 mm675 mm35Vinyl, card and thin sheet
3 × 2.27 in (76 × 58 mm)1.5 mm1,013 mm12Vinyl, card and thin sheet
4 × 3.03 in (102 × 77 mm)2 mm1,350 mm6Vinyl, card and thin sheet
6 × 4.55 in (152 × 116 mm)3 mm2,025 mm2Any material, including 3 mm wood and acrylic
8 × 6.06 in (203 × 154 mm)4.1 mm2,701 mm1Any material, including 3 mm wood and acrylic
12 × 9.1 in (305 × 231 mm)6.1 mm4,051 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy to the World SVG files

← Joy to the World in block capitals All 12 Joy to the World designs Joy to the World with stars →