Free Joy to the World SVG

Joy to the World in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Joy to the World in Alfa Slab One, as a solid black shape
Joy to the World in Alfa Slab One. The preview is the SVG file itself.

“Joy to the World” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 38 mm (3.94 × 1.48 in), scales to any size
Pieces13 separate pieces
Outlines to cut18: 13 outer edges and 5 cut-outs
Cut length742 mm at this size
Narrowest part2.1 mm at this size
Nodes209 curve and line segments

Measured from the file. PNG: 2,000 × 798 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)0.53 mm188 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.75 in (51 × 19 mm)1.1 mm377 mm60Vinyl, card and thin sheet
3 × 1.13 in (76 × 29 mm)1.6 mm565 mm27Vinyl, card and thin sheet
4 × 1.5 in (102 × 38 mm)2.1 mm754 mm14Vinyl, card and thin sheet
6 × 2.25 in (152 × 57 mm)3.2 mm1,131 mm4Any material, including 3 mm wood and acrylic
8 × 3 in (203 × 76 mm)4.3 mm1,508 mm3Any material, including 3 mm wood and acrylic
12 × 4.5 in (305 × 114 mm)6.4 mm2,262 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Joy to the World SVG files

← Joy to the World in Lilita One All 13 Joy to the World designs Joy to the World in Amatic SC →