Free jaguar SVG

Stalking jaguar SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stalking jaguar, as a solid black shape
Stalking jaguar. The preview is the SVG file itself.

A jaguar crouched low to stalk, belly near the ground, head and tail held level and one front paw reaching. Long and low, for the bottom edge of a sign, a shelf or a car window.

What is in the file

Size100 × 31 mm (3.94 × 1.2 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut74: 1 outer edge and 73 cut-outs
Cut length826 mm at this size
Narrowest part1.2 mm at this size
Nodes533 curve and line segments

Measured from the file. PNG: 2,000 × 665 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.3 mm210 mm240Too fine for most machines
2 × 0.61 in (51 × 16 mm)0.61 mm420 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.92 in (76 × 23 mm)0.91 mm629 mm30Fine detail: vinyl and paper only, weed with care
4 × 1.22 in (102 × 31 mm)1.2 mm839 mm16Vinyl, card and thin sheet
6 × 1.84 in (152 × 47 mm)1.8 mm1,259 mm5Vinyl, card and thin sheet
8 × 2.45 in (203 × 62 mm)2.4 mm1,678 mm4Vinyl, card and thin sheet
12 × 3.67 in (305 × 93 mm)3.7 mm2,518 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jaguar SVG files

← Jaguar resting on a branch All 13 jaguars Leaping jaguar with rosettes →