Free jaguar SVG

Jaguar paw print SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jaguar paw print, as a solid black shape
Jaguar paw print. The preview is the SVG file itself.

A jaguar track: a broad pad with three lobes and four round toes, wider than it is long, with no claw marks because cats walk with their claws drawn in. Five loose pieces, to keep on the transfer tape.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces5 separate pieces
Outlines to cut5 outlines
Cut length525 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes68 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)Over 1.5 mm133 mm110Vinyl, card and thin sheet
2 × 1.8 in (51 × 46 mm)Over 3 mm267 mm30Any material, including 3 mm wood and acrylic
3 × 2.7 in (76 × 69 mm)Over 4.6 mm400 mm12Any material, including 3 mm wood and acrylic
4 × 3.6 in (102 × 91 mm)Over 6.1 mm533 mm6Any material, including 3 mm wood and acrylic
6 × 5.4 in (152 × 137 mm)Over 9.1 mm800 mm2Any material, including 3 mm wood and acrylic
8 × 7.2 in (203 × 183 mm)Over 12 mm1,067 mm1Any material, including 3 mm wood and acrylic
12 × 10.8 in (305 × 274 mm)Over 18 mm1,600 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jaguar SVG files

← Jaguar face All 13 jaguars Jaguar spots in a circle →