Free jaguar SVG

Jaguar head from the side SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jaguar head from the side, as a solid black shape
Jaguar head from the side. The preview is the SVG file itself.

The head and neck of a jaguar in profile: a domed brow, a short muzzle and heavy jowls, with the eye, nostril, mouth and whisker dots cut out, small spots on the brow and rosettes down the neck.

What is in the file

Size92 × 100 mm (3.6 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut85: 1 outer edge and 84 cut-outs
Cut length1,403 mm at this size
Narrowest part1.9 mm at this size
Nodes865 curve and line segments

Measured from the file. PNG: 1,837 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.48 mm356 mm100Too fine for most machines
1.83 × 2 in (46 × 51 mm)0.97 mm713 mm30Fine detail: vinyl and paper only, weed with care
2.74 × 3 in (70 × 76 mm)1.4 mm1,069 mm12Vinyl, card and thin sheet
3.66 × 4 in (93 × 102 mm)1.9 mm1,425 mm6Vinyl, card and thin sheet
5.49 × 6 in (139 × 152 mm)2.9 mm2,138 mm2Vinyl, card and thin sheet
7.32 × 8 in (186 × 203 mm)3.9 mm2,851 mm1Any material, including 3 mm wood and acrylic
10.98 × 12 in (279 × 305 mm)5.8 mm4,276 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jaguar SVG files

← Leaping jaguar with rosettes All 13 jaguars Jaguar face →