Free In Memory Of SVG

In Memory Of stencil plate SVG

In Memory Of stencil plate, as a solid black shape
In Memory Of stencil plate. The preview is the SVG file itself.

A rounded plate with “IN MEMORY OF” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size87 × 100 mm (3.44 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,297 mm at this size
Narrowest part1.5 mm at this size
Nodes225 curve and line segments

Measured from the file. PNG: 1,758 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.38 mm329 mm110Too fine for most machines
1.75 × 2 in (44 × 51 mm)0.76 mm659 mm30Fine detail: vinyl and paper only, weed with care
2.62 × 3 in (67 × 76 mm)1.1 mm988 mm12Vinyl, card and thin sheet
3.5 × 4 in (89 × 102 mm)1.5 mm1,318 mm6Vinyl, card and thin sheet
5.24 × 6 in (133 × 152 mm)2.3 mm1,977 mm2Vinyl, card and thin sheet
6.99 × 8 in (178 × 203 mm)3 mm2,636 mm1Any material, including 3 mm wood and acrylic
10.49 × 12 in (266 × 305 mm)4.6 mm3,953 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Memory Of SVG files

← In Memory Of outline lettering All 12 In Memory Of designs In Memory Of with a drop shadow →