Free In Memory Of SVG

In Memory Of with a drop shadow SVG

In Memory Of with a drop shadow, in layered colours
In Memory Of with a drop shadow. The preview is the SVG file itself.

“In Memory Of” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 56 mm (3.94 × 2.22 in), scales to any size
Pieces8 separate pieces
Outlines to cut15: 8 outer edges and 7 cut-outs
Cut length1,199 mm at this size
Narrowest part2.1 mm at this size
Nodes461 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,162 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.53 mm305 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.13 in (51 × 29 mm)1.1 mm609 mm45Vinyl, card and thin sheet
3 × 1.69 in (76 × 43 mm)1.6 mm914 mm18Vinyl, card and thin sheet
4 × 2.26 in (102 × 57 mm)2.1 mm1,218 mm8Vinyl, card and thin sheet
6 × 3.38 in (152 × 86 mm)3.2 mm1,827 mm3Any material, including 3 mm wood and acrylic
8 × 4.51 in (203 × 115 mm)4.3 mm2,436 mm2Any material, including 3 mm wood and acrylic
12 × 6.77 in (305 × 172 mm)6.4 mm3,655 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Memory Of SVG files

← In Memory Of stencil plate All 12 In Memory Of designs In Memory Of in Pacifico →