Free In Memory Of SVG

In Memory Of in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

In Memory Of in Amatic SC, as a solid black shape
In Memory Of in Amatic SC. The preview is the SVG file itself.

“In Memory Of” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces10 separate pieces
Outlines to cut13: 10 outer edges and 3 cut-outs
Cut length1,072 mm at this size
Narrowest part1.6 mm at this size
Nodes362 curve and line segments

Measured from the file. PNG: 2,000 × 1,415 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.41 mm272 mm130Too fine for most machines
2 × 1.39 in (51 × 35 mm)0.81 mm545 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)1.2 mm817 mm15Vinyl, card and thin sheet
4 × 2.78 in (102 × 71 mm)1.6 mm1,089 mm8Vinyl, card and thin sheet
6 × 4.18 in (152 × 106 mm)2.4 mm1,634 mm2Vinyl, card and thin sheet
8 × 5.57 in (203 × 141 mm)3.3 mm2,178 mm2Any material, including 3 mm wood and acrylic
12 × 8.35 in (305 × 212 mm)4.9 mm3,267 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Memory Of SVG files

← In Memory Of in Alfa Slab One All 13 In Memory Of designs In Memory Of in block capitals →