Free In Memory Of SVG

In Memory Of in Alfa Slab One SVG

In Memory Of in Alfa Slab One, as a solid black shape
In Memory Of in Alfa Slab One. The preview is the SVG file itself.

“In Memory Of” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 34 mm (3.94 × 1.32 in), scales to any size
Pieces10 separate pieces
Outlines to cut13: 10 outer edges and 3 cut-outs
Cut length581 mm at this size
Narrowest part1.9 mm at this size
Nodes338 curve and line segments

Measured from the file. PNG: 2,000 × 723 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.34 in (25 × 9 mm)0.48 mm148 mm220Too fine for most machines
2 × 0.67 in (51 × 17 mm)0.97 mm295 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.01 in (76 × 26 mm)1.4 mm443 mm30Vinyl, card and thin sheet
4 × 1.34 in (102 × 34 mm)1.9 mm590 mm14Vinyl, card and thin sheet
6 × 2.02 in (152 × 51 mm)2.9 mm885 mm5Vinyl, card and thin sheet
8 × 2.69 in (203 × 68 mm)3.9 mm1,181 mm4Any material, including 3 mm wood and acrylic
12 × 4.03 in (305 × 102 mm)5.8 mm1,771 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Memory Of SVG files

← In Memory Of in Lilita One All 12 In Memory Of designs In Memory Of in Amatic SC →