Free In Memory Of SVG

In Memory Of in Lilita One SVG

In Memory Of in Lilita One, as a solid black shape
In Memory Of in Lilita One. The preview is the SVG file itself.

“In Memory Of” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 38 mm (3.94 × 1.48 in), scales to any size
Pieces10 separate pieces
Outlines to cut13: 10 outer edges and 3 cut-outs
Cut length566 mm at this size
Narrowest part2.8 mm at this size
Nodes214 curve and line segments

Measured from the file. PNG: 2,000 × 802 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)0.71 mm144 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.75 in (51 × 19 mm)1.4 mm288 mm60Vinyl, card and thin sheet
3 × 1.13 in (76 × 29 mm)2.1 mm431 mm27Vinyl, card and thin sheet
4 × 1.51 in (102 × 38 mm)2.8 mm575 mm14Vinyl, card and thin sheet
6 × 2.26 in (152 × 57 mm)4.3 mm863 mm4Any material, including 3 mm wood and acrylic
8 × 3.02 in (203 × 77 mm)5.7 mm1,150 mm3Any material, including 3 mm wood and acrylic
12 × 4.52 in (305 × 115 mm)8.5 mm1,725 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Memory Of SVG files

← In Memory Of in Kaushan Script All 12 In Memory Of designs In Memory Of in Alfa Slab One →