I’m Just Here for the Pie stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “I’M JUST HERE FOR THE PIE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.5 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 21: 1 outer edge and 20 cut-outs |
| Cut length | 1,762 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 415 curve and line segments |
Measured from the file. PNG: 2,000 × 1,785 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 23 mm) | 0.43 mm | 448 mm | 110 | Too fine for most machines |
| 2 × 1.78 in (51 × 45 mm) | 0.86 mm | 895 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.66 in (76 × 68 mm) | 1.3 mm | 1,343 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.55 in (102 × 90 mm) | 1.7 mm | 1,790 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.33 in (152 × 135 mm) | 2.6 mm | 2,685 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.1 in (203 × 180 mm) | 3.5 mm | 3,580 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.66 in (305 × 271 mm) | 5.2 mm | 5,371 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I’m Just Here for the Pie SVG files
-
I’m Just Here for the Pie with a drop shadow Layered · 19 pieces -
I’m Just Here for the Pie in Pacifico Solid · 12 pieces -
I’m Just Here for the Pie in Lobster Solid · 14 pieces -
I’m Just Here for the Pie in Kaushan Script Solid · 21 pieces -
I’m Just Here for the Pie in Lilita One Solid · 21 pieces -
I’m Just Here for the Pie in Alfa Slab One Solid · 21 pieces -
I’m Just Here for the Pie in Amatic SC Solid · 20 pieces -
I’m Just Here for the Pie in block capitals Solid · 20 pieces
← I’m Just Here for the Pie outline lettering All 12 I’m Just Here for the Pie designs I’m Just Here for the Pie with a drop shadow →