Free I’m Just Here for the Pie SVG

I’m Just Here for the Pie with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I’m Just Here for the Pie with a drop shadow, in layered colours
I’m Just Here for the Pie with a drop shadow. The preview is the SVG file itself.

“I’m Just Here for the Pie” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size90 × 100 mm (3.54 × 3.94 in), scales to any size
Pieces19 separate pieces
Outlines to cut40: 19 outer edges and 21 cut-outs
Cut length2,367 mm at this size
Narrowest part1.9 mm at this size
Nodes774 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 1,808 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.9 × 1 in (23 × 25 mm)0.48 mm601 mm110Too fine for most machines
1.8 × 2 in (46 × 51 mm)0.97 mm1,202 mm30Fine detail: vinyl and paper only, weed with care
2.7 × 3 in (69 × 76 mm)1.4 mm1,804 mm12Vinyl, card and thin sheet
3.6 × 4 in (91 × 102 mm)1.9 mm2,405 mm6Vinyl, card and thin sheet
5.4 × 6 in (137 × 152 mm)2.9 mm3,607 mm2Vinyl, card and thin sheet
7.2 × 8 in (183 × 203 mm)3.9 mm4,810 mm1Any material, including 3 mm wood and acrylic
10.8 × 12 in (274 × 305 mm)5.8 mm7,215 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Pie SVG files

← I’m Just Here for the Pie stencil plate All 13 I’m Just Here for the Pie designs I’m Just Here for the Pie with a spoon and fork →