I’m Just Here for the Pie in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I’m Just Here for the Pie” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.89 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 27: 21 outer edges and 6 cut-outs |
| Cut length | 1,351 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 362 curve and line segments |
Measured from the file. PNG: 2,000 × 1,488 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 19 mm) | 0.51 mm | 343 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.47 in (51 × 37 mm) | 1 mm | 686 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.2 in (76 × 56 mm) | 1.5 mm | 1,029 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.94 in (102 × 75 mm) | 2 mm | 1,373 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.4 in (152 × 112 mm) | 3 mm | 2,059 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.87 in (203 × 149 mm) | 4.1 mm | 2,745 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.81 in (305 × 224 mm) | 6.1 mm | 4,118 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I’m Just Here for the Pie SVG files
-
I’m Just Here for the Pie in Amatic SC Solid · 20 pieces
-
I’m Just Here for the Pie in block capitals Solid · 20 pieces
-
I’m Just Here for the Pie in script and capitals Solid · 18 pieces
-
I’m Just Here for the Pie with hearts Solid · 20 pieces
-
I’m Just Here for the Pie outline lettering Outline · 23 pieces
-
I’m Just Here for the Pie stencil plate Solid · one piece
-
I’m Just Here for the Pie with a drop shadow Layered · 19 pieces
-
I’m Just Here for the Pie with a spoon and fork Solid · 19 pieces
← I’m Just Here for the Pie in Lilita One All 13 I’m Just Here for the Pie designs I’m Just Here for the Pie in Amatic SC →