Free I’m Just Here for the Pie SVG

I’m Just Here for the Pie in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I’m Just Here for the Pie in Lilita One, as a solid black shape
I’m Just Here for the Pie in Lilita One. The preview is the SVG file itself.

“I’m Just Here for the Pie” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces21 separate pieces
Outlines to cut27: 21 outer edges and 6 cut-outs
Cut length1,279 mm at this size
Narrowest part3.1 mm at this size
Nodes411 curve and line segments

Measured from the file. PNG: 2,000 × 1,658 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.79 mm325 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.64 in (51 × 42 mm)1.6 mm650 mm30Vinyl, card and thin sheet
3 × 2.47 in (76 × 63 mm)2.4 mm975 mm12Vinyl, card and thin sheet
4 × 3.29 in (102 × 84 mm)3.1 mm1,299 mm6Any material, including 3 mm wood and acrylic
6 × 4.93 in (152 × 125 mm)4.7 mm1,949 mm2Any material, including 3 mm wood and acrylic
8 × 6.58 in (203 × 167 mm)6.3 mm2,599 mm1Any material, including 3 mm wood and acrylic
12 × 9.86 in (305 × 251 mm)9.4 mm3,898 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Pie SVG files

← I’m Just Here for the Pie in Kaushan Script All 13 I’m Just Here for the Pie designs I’m Just Here for the Pie in Alfa Slab One →