Free I’m Just Here for the Pie SVG

I’m Just Here for the Pie outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I’m Just Here for the Pie outline lettering, drawn as a line
I’m Just Here for the Pie outline lettering. The preview is the SVG file itself.

“I’m Just Here for the Pie” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 78 mm (3.94 × 3.07 in), scales to any size
Pieces23 separate pieces
Outlines to cut52: 23 outer edges and 29 cut-outs
Cut length2,110 mm at this size
Narrowest part0.8 mm at this size
Nodes690 curve and line segments

Measured from the file. PNG: 2,000 × 1,577 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.2 mm536 mm120Too fine for most machines
2 × 1.56 in (51 × 40 mm)0.41 mm1,072 mm30Too fine for most machines
3 × 2.34 in (76 × 59 mm)0.61 mm1,608 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.12 in (102 × 79 mm)0.81 mm2,144 mm6Fine detail: vinyl and paper only, weed with care
6 × 4.68 in (152 × 119 mm)1.2 mm3,216 mm2Vinyl, card and thin sheet
8 × 6.24 in (203 × 158 mm)1.6 mm4,288 mm1Vinyl, card and thin sheet
12 × 9.36 in (305 × 238 mm)2.4 mm6,431 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Pie SVG files

← I’m Just Here for the Pie with hearts All 13 I’m Just Here for the Pie designs I’m Just Here for the Pie stencil plate →