Free Honk If a Kid Falls Out SVG

Honk If a Kid Falls Out in Pacifico SVG

Honk If a Kid Falls Out in Pacifico, as a solid black shape
Honk If a Kid Falls Out in Pacifico. The preview is the SVG file itself.

“Honk If a Kid Falls Out” set in Pacifico, a bold brush script, on 3 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.92 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut23: 11 outer edges and 12 cut-outs
Cut length1,523 mm at this size
Narrowest part1.7 mm at this size
Nodes692 curve and line segments

Measured from the file. PNG: 1,992 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.43 mm387 mm100Too fine for most machines
1.99 × 2 in (51 × 51 mm)0.86 mm774 mm25Fine detail: vinyl and paper only, weed with care
2.99 × 3 in (76 × 76 mm)1.3 mm1,161 mm9Vinyl, card and thin sheet
3.98 × 4 in (101 × 102 mm)1.7 mm1,547 mm4Vinyl, card and thin sheet
5.98 × 6 in (152 × 152 mm)2.6 mm2,321 mm1Vinyl, card and thin sheet
7.97 × 8 in (202 × 203 mm)3.5 mm3,095 mm1Any material, including 3 mm wood and acrylic
11.95 × 12 in (304 × 305 mm)5.2 mm4,642 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Honk If a Kid Falls Out SVG files

← Honk If a Kid Falls Out with a drop shadow All 12 Honk If a Kid Falls Out designs Honk If a Kid Falls Out in Lobster →