Free Honk If a Kid Falls Out SVG

Honk If a Kid Falls Out in Alfa Slab One SVG

Honk If a Kid Falls Out in Alfa Slab One, as a solid black shape
Honk If a Kid Falls Out in Alfa Slab One. The preview is the SVG file itself.

“Honk If a Kid Falls Out” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 69 mm (3.94 × 2.73 in), scales to any size
Pieces19 separate pieces
Outlines to cut24: 19 outer edges and 5 cut-outs
Cut length1,224 mm at this size
Narrowest part2.2 mm at this size
Nodes610 curve and line segments

Measured from the file. PNG: 2,000 × 1,410 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 18 mm)0.56 mm311 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.39 in (51 × 35 mm)1.1 mm622 mm35Vinyl, card and thin sheet
3 × 2.08 in (76 × 53 mm)1.7 mm933 mm15Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)2.2 mm1,244 mm8Vinyl, card and thin sheet
6 × 4.16 in (152 × 106 mm)3.4 mm1,865 mm2Any material, including 3 mm wood and acrylic
8 × 5.54 in (203 × 141 mm)4.5 mm2,487 mm2Any material, including 3 mm wood and acrylic
12 × 8.32 in (305 × 211 mm)6.7 mm3,731 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Honk If a Kid Falls Out SVG files

← Honk If a Kid Falls Out in Lilita One All 12 Honk If a Kid Falls Out designs Honk If a Kid Falls Out in Amatic SC →