Free Honk If a Kid Falls Out SVG

Honk If a Kid Falls Out with stars SVG

Honk If a Kid Falls Out with stars, as a solid black shape
Honk If a Kid Falls Out with stars. The preview is the SVG file itself.

“Honk If a Kid Falls Out” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.96 × 3.94 in), scales to any size
Pieces18 separate pieces
Outlines to cut24: 18 outer edges and 6 cut-outs
Cut length1,298 mm at this size
Narrowest part0.8 mm at this size
Nodes557 curve and line segments

Measured from the file. PNG: 1,525 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.2 mm330 mm120Too fine for most machines
1.51 × 2 in (38 × 51 mm)0.41 mm659 mm35Too fine for most machines
2.26 × 3 in (57 × 76 mm)0.61 mm989 mm12Fine detail: vinyl and paper only, weed with care
3.01 × 4 in (77 × 102 mm)0.81 mm1,319 mm6Fine detail: vinyl and paper only, weed with care
4.52 × 6 in (115 × 152 mm)1.2 mm1,978 mm2Vinyl, card and thin sheet
6.02 × 8 in (153 × 203 mm)1.6 mm2,638 mm1Vinyl, card and thin sheet
9.04 × 12 in (230 × 305 mm)2.4 mm3,956 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Honk If a Kid Falls Out SVG files

← Honk If a Kid Falls Out in script and capitals All 12 Honk If a Kid Falls Out designs Honk If a Kid Falls Out outline lettering →