Free Honk If a Kid Falls Out SVG

Honk If a Kid Falls Out in Lobster SVG

Honk If a Kid Falls Out in Lobster, as a solid black shape — Honk If a Kid Falls Out in Lobster. The preview is the SVG file itself.

“Honk If a Kid Falls Out” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.92 × 3.94 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	18: 12 outer edges and 6 cut-outs
Cut length	1,480 mm at this size
Narrowest part	1.4 mm at this size
Nodes	559 curve and line segments

Measured from the file. PNG: 1,990 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.36 mm	376 mm	100	Too fine for most machines
1.99 × 2 in (51 × 51 mm)	0.71 mm	752 mm	25	Fine detail: vinyl and paper only, weed with care
2.99 × 3 in (76 × 76 mm)	1.1 mm	1,128 mm	9	Vinyl, card and thin sheet
3.98 × 4 in (101 × 102 mm)	1.4 mm	1,504 mm	4	Vinyl, card and thin sheet
5.97 × 6 in (152 × 152 mm)	2.1 mm	2,256 mm	1	Vinyl, card and thin sheet
7.96 × 8 in (202 × 203 mm)	2.8 mm	3,007 mm	1	Vinyl, card and thin sheet
11.94 × 12 in (303 × 305 mm)	4.3 mm	4,511 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Honk If a Kid Falls Out SVG files

← Honk If a Kid Falls Out in Pacifico All 12 Honk If a Kid Falls Out designs Honk If a Kid Falls Out in Kaushan Script →