Honk If a Kid Falls Out in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Honk If a Kid Falls Out” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.08 in), scales to any size |
|---|---|
| Pieces | 19 separate pieces |
| Outlines to cut | 24: 19 outer edges and 5 cut-outs |
| Cut length | 1,190 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 325 curve and line segments |
Measured from the file. PNG: 2,000 × 1,583 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.71 mm | 302 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.57 in (51 × 40 mm) | 1.4 mm | 605 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.35 in (76 × 60 mm) | 2.1 mm | 907 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.13 in (102 × 80 mm) | 2.8 mm | 1,209 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.7 in (152 × 119 mm) | 4.3 mm | 1,814 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.26 in (203 × 159 mm) | 5.7 mm | 2,418 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.4 in (305 × 239 mm) | 8.5 mm | 3,627 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Honk If a Kid Falls Out SVG files
-
Honk If a Kid Falls Out in Alfa Slab One Solid · 19 pieces
-
Honk If a Kid Falls Out in Amatic SC Solid · 18 pieces
-
Honk If a Kid Falls Out in block capitals Solid · 18 pieces
-
Honk If a Kid Falls Out in script and capitals Solid · 16 pieces
-
Honk If a Kid Falls Out with stars Solid · 18 pieces
-
Honk If a Kid Falls Out outline lettering Outline · 22 pieces
-
Honk If a Kid Falls Out stencil plate Solid · one piece
-
Honk If a Kid Falls Out with a drop shadow Layered · 17 pieces
← Honk If a Kid Falls Out in Kaushan Script All 13 Honk If a Kid Falls Out designs Honk If a Kid Falls Out in Alfa Slab One →