Free heart SVG

Heart outline SVG

Heart outline, drawn as a line
Heart outline. The preview is the SVG file itself.

The classic heart as a band 5 to 6 mm wide at this size, with a mitred V under the notch. Sturdy enough to cut from card or thin wood as a frame, a wreath base or an appliqué border.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length594 mm at this size
Narrowest part5.2 mm at this size
Nodes49 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)1.3 mm151 mm110Vinyl, card and thin sheet
2 × 1.81 in (51 × 46 mm)2.6 mm302 mm30Vinyl, card and thin sheet
3 × 2.71 in (76 × 69 mm)4 mm453 mm12Any material, including 3 mm wood and acrylic
4 × 3.62 in (102 × 92 mm)5.3 mm604 mm6Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)7.9 mm905 mm2Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)11 mm1,207 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)16 mm1,811 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More heart SVG files

← Pointed heart with straight sides All 25 hearts Thin pointed heart outline →