Free heart SVG

Heart with an arrow through it SVG

Heart with an arrow through it. The preview is the SVG file itself.

A heart shot through by an arrow, with a slit either side of the shaft where it comes out so it reads as passing through. One welded piece with a barbed head and notched feathers.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.73 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	547 mm at this size
Narrowest part	3.1 mm at this size
Nodes	61 curve and line segments

Measured from the file. PNG: 2,000 × 1,410 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.79 mm	139 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.39 in (51 × 35 mm)	1.6 mm	278 mm	35	Vinyl, card and thin sheet
3 × 2.08 in (76 × 53 mm)	2.4 mm	417 mm	15	Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)	3.1 mm	556 mm	8	Any material, including 3 mm wood and acrylic
6 × 4.16 in (152 × 106 mm)	4.7 mm	834 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.54 in (203 × 141 mm)	6.3 mm	1,112 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.32 in (305 × 211 mm)	9.4 mm	1,667 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More heart SVG files

← Heartbeat line with a heart All 25 hearts Interlocking hearts →